Nov 27, 2015

How to prevent your cell phone from hanging

How to prevent your cell phone from hanging
How to prevent your phone from hanging
Cell phone getting hanged is a common issue mobile phone users are facing worldwide. It is so annoying when you have some important work to do but your phone refuses by getting hanged. You are out of moves and all you can do is to wait and watch. There are some reasons behind it. You can prevent your phone from hanging though.
Here are 5 tips you can use to prevent your phone from getting hanged.

Tip 1: Uninstall all antivirus and cleaning apps from your phone. These apps are one of the reasons for your phone getting hanged.

Tip 2: Only keep the apps you really need. Any apps you don’t need should be uninstalled. More the apps in your phone slow the performance. These apps may at times dangerous for your phone because all these apps keep increasing the data storage and finally hang your phone.

Tip 3: Your apps make a large amount of data inside your phone. Over the time the data gets increased. At regular intervals keep clearing the data of apps you use. It will keep your phone healthy.

Tip 4: Try to install the apps in SD Card instead of internal memory as it puts a lot of pressure on RAM and phone starts to hang. If you have already installed apps to internal memory, move them to SD Card.

Tip 5: Always try to keep the internal storage of your phone free. Make sure you keep your data on SD card whether it is videos or images or anything else. This will prevent you’re your phone from getting hanged. It will increase the speed of your phone as well.

Any questions? Kindly leave a comment....!!!
Happy Learning...!!!
Read More »

Nov 19, 2015

How to Block Websites in Google Chrome

How to Block Websites in Google Chrome
While internet came with an ocean of good things, it can turn really bad in some cases like your children getting access to unwanted websites accidentally or may be deliberately. Your children are surfing the net for the information or material they need for their studies and certainly they click something which leads them to a website with adult, unwanted or porn contents.
Fortunately there are few prevention methods which can protect you from all this mess. Today in this post we will talk about one of them
If you are using Google Chrome and looking to block some websites then follow the steps below to Block Websites. In Chrome there is no specific setting to block Websites. You have to use Google Extensions to block it. It's free, safe, and easy to use.

Step 1:  Open Google Chrome and click on settings icon.

Step 2: Go to Tools>ExtensionsNow click on and on left hand search box, Type and search for "block site" and from Type select Extension.

Step 3: Download that Extension by clicking on "Add to Chrome".

Step 4: After downloading it, get back to Chrome Extension tab. Now there you will find that Block Site Extension. Now click on Options.

Step 5: Here add the website you want to block and Click "Add page" "

You are Done...!!!

Any questions? Leave a comment....!!
Happy Learning..... :)

Read More »

Nov 18, 2015

How to make Privacy Policy for your Website/Blog

How to make Privacy Policy for your Website/Blog
Privacy Policy is a must have for a website or Blog. You can make yourself the privacy policy for your Blog or website. There are many websites online which do this job for you absolutely free of cost. If you want privacy policy for your Blog just follows the simple steps given below:-

Step 1:  Click here to go to the website which will make privacy policy for your blog

Step 2: Click Sine Up.

Step 3: A form will appear. Fill up the form.                       
1.       Enter your blog URL.
2.       Enter your Email Address.
3.       Select Yes, We use Cookies 
4.       If you are showing Ads on your Blog/Website, In the Advertise Information field enter the name of advertisers  like Google Adsence, Adfly, Bidvertiser, Traffic Monsoon Etc

Step 4: Now Click on Create My Privacy Policy 

Step 5: A new page will open with the privacy policy of your Blog/Website

Step 6: Copy the whole text.

Step 7: create a new page in your Blog/Website by the name Privacy Policy and paste the copied text.

Step 8: Save and Publish the page.

Done…You have successfully created the privacy policy for your Blog/Website.

Any Questions?  Leave a comment.....!!
Read More »

How to Password Protect Folder without any software

How to Password Protect Folder without any software
Sometimes you have personal stuff you want to hide from your computer. You can protect your Folder with a Password and completely hide the folder in Window 7. You don’t have to use any software to protect your folder. Just follow the steps given below:-

Step 1: Open notepad (Click Start> Run Type "notepad" and Enter)

OR:  Right Click and Select New>Text Document.

Step 2: Copy Paste the Code given below in that notepad file.

title TariqYousuf Folder SAFE
if EXIST "RecycleBin.{645ff040-5081-101b-9f08-00aa002f954e}" goto UNLOCK
if NOT EXIST SAFE goto TariqYousuf
echo Are you sure to Lock this folder? (Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
if %cho%==k goto TariqYousuf
 if %cho%==K goto TariqYousuf
echo Invalid choice.
ren SAFE "RecycleBin.{645ff040-5081-101b-9f08-00aa002f954e}"
attrib +h +s "RecycleBin.{645ff040-5081-101b-9f08-00aa002f954e}"
echo Folder locked
goto End
echo Enter password to Unlock Your Secure Folder
set/p "pass=>"
if %pass%==k goto K2H
 if %pass%==K goto K2H
if NOT %pass%== tyk786 goto FAIL
attrib -h -s "RecycleBin.{645ff040-5081-101b-9f08-00aa002f954e}"
ren "RecycleBin.{645ff040-5081-101b-9f08-00aa002f954e}" SAFE
echo Folder Unlocked successfully
goto End
Echo password mismatch. Please check your password and try again.
goto end
echo SAFE created successfully
goto End
 : TariqYousuf
Step 3: "tyk786" written in red color is the Password in the above code. Replace it with the Password of your choice.

Step 4: Save that file with any name like “Tariq.txt” and Change the extension from ".txt" to ".bat"
Note: If you are not able to see the extension or don't know how to do it. You may read my post on how to unhide file extension.

Step 5: 
  • Double Click on “Tariq.bata new Folder with name “SAFE" will automatically be created.
  • This "SAFE" Folder is your secret folder. Just move or save anything in that folder that you want to lock or hide with a password. 
  • Now you are ready to lock your folder.

Step 6: 
  • Again double click on “Tariq.bat” file, a command prompt will appear, just press "Y" and hit Enter to hide that folder. 
  • You will see that, the "SAFE" folder has been hidden. 
  • To unhide that folder again, Double click on “Tariq.bat " file again, and in Command Prompt, just enter your password and hit Enter.
Done, you can now see that folder again.

Read More »

How to speed up your slow PC

How to speed up a slow computer
Over the time your computer starts getting slowed and does not run smoothly. Its annoying I know. There are many reasons behind the slow performance of your PC. 
Here are five ways you can clean and speedup an old PC to make it work better.

1. Speed up the Startup
Most likely your computer is not slow – it’s the dozens of programs turning on during startup that is slowing it down. You can choose the programs which you like to turn on at startup by following below steps:-
                1.Click Start button, type “msconfig” in the search box and press Enter.
        2.Click on startup
        3.Select the programs you would like to turn on at startup. (Less programs = More speed)
        4.Click OK.

2. Clear your computer.
Your computer collects a lot of temporary files which cause your computer to run slow. Follow the below steps to clean up your computer.
a        1.Click Start button, type “disk” in the search box
b        2.Click on DiscCleanup usually appear at the top.
c        3.A new window will pop up. Click OK and wait as it will take some time.
d        4.Check all boxes and click OK.
e        5.A confirmation dialog box will appear. Click Delete Files.

3. Uninstall unnecessary programs.
One of main reasons for slowing down computer is excessive programs installed. You should only install programs which you use. Uninstall the programs you don’t use anymore.

4. Make Some Upgrades.
The most effective way to speed up your PC is to add more RAM (random access memory). Go to My Computer > Properties to find out how much RAM your computer has, if it is less than 2GB, you must upgrade your RAM.

5. Keep your computer updated.
You must keep your computer programs updated. An outdated program may not only slow down your computer but also can cause damage to your computer or data as an outdated program contains vulnerabilities. You can manually update a program or turn on “Automatic Updates”. 

There are many software as well which can keep your computer clean automatically. Click Here to download one of these software to get the job done for you.

Any questions? Leave a comment... 
Happy Learning.... :)
Read More »

How to add Read More button in blog posts

How to add Read More button in blog posts
how to add readmore button to your blog posts
Read More button is must for a blog. By default a blog displays a whole post therefore a single post is displayed at a time. If you add a read more button almost 10 posts will be shown at a time. By adding a Read More button your blog will attract more visitors.  ReadMore button increases the beauty of the blog as well. Go through the steps below to add a Read More button to your blog posts.

Step 1Login to Blogger. Go to Template and click Edit HTML button.
Step 2. Now click anywhere in the text, then press Ctrl+F buttons. A search box will appear. Type </head>  in search box and hit enter. It will search the code in the Template.

Now copy the below code and paste it above </head> code.

<script type='text/javascript'>
posts_no_thumb_sum = 500; //
posts_thumb_sum = 400;    //
img_thumb_height = 160;   //
img_thumb_width = 180;    //
<script type='text/javascript'>
function removeHtmlTag(strx,chop){
var s = strx.split("<");
for(var i=0;i<s.length;i++){
s[i] = s[i].substring(s[i].indexOf(">")+1,s[i].length);
strx = s.join("");
chop = (chop < strx.length-1) ? chop : strx.length-2;
while(strx.charAt(chop-1)!=' ' && strx.indexOf(' ',chop)!=-1) chop++;
strx = strx.substring(0,chop-1);
return strx+'...';
function createSummaryAndThumb(pID, pURL, pTITLE){
var div = document.getElementById(pID);
var imgtag = "";
var img = div.getElementsByTagName("img");
var summ = posts_no_thumb_sum;
if(img.length>=1) {
imgtag = '<span class="posts-thumb" style="float:left; margin-right: 10px;"><a href="'+ pURL +'" title="'+ pTITLE+'"><img src="'+img[0].src+'" width="'+img_thumb_width+'px" height="'+img_thumb_height+'px" /></a></span>';
summ = posts_thumb_sum;

var summary = imgtag + '<div>' + removeHtmlTag(div.innerHTML,summ) + '</div>';
div.innerHTML = summary;

<b:if cond='data:blog.pageType != &quot;static_page&quot;'>
<b:if cond='data:blog.pageType != &quot;item&quot;'>
<style type='text/css'>
.post-footer {display: none;}
.post {margin-bottom: 10px; border-bottom: 1px dotted #E6E6E6; padding-bottom: 20px;}
 .readmore a {text-decoration: none; }


You can change the numbers colored red in the code according to your choice.
Posts_no _thumb_sum=500;//   500 words if there is not an image in the post

Posts_thumb_sum=400;//   400 words if there is an image
Img_thumb_height=160;//    160 is the height of image
Img_thumb_width=180;//    180 is the width of image

Step 3.  Now press Ctrl+F and search for this code <data:post.body/>

Note:This code can of at many places. Press enter as many times as required to find how many times this code is in the template.

Erase the last code and copy paste the below code there
<b:if cond='data:blog.pageType != &quot;static_page&quot;'>
<b:if cond='data:blog.pageType != &quot;item&quot;'>
<div expr:id='&quot;summary&quot; +'><data:post.body/></div>
<script type='text/javascript'>createSummaryAndThumb(&quot;summary<>&quot;,&quot;<data:post.url/>&quot;,&quot;<data:post.title/>&quot;);</script>
 <span class='readmore' style='float:right;'><a expr:href='data:post.url'>Read More &#187;</a></span></b:if></b:if>
<b:if cond='data:blog.pageType == &quot;item&quot;'><data:post.body/></b:if>
<b:if cond='data:blog.pageType == &quot;static_page&quot;'><data:post.body/></b:if>

Step 4. Now click on Preview Template and check it. 
Step 5.Now click Save Template and you are done.

Important Note: Download a backup of your Template before applying this. If you are not sure how to do this, you can read my post on How to download backup of Template in Blogger.

If you like this post or have any questions, Please leave a comment below
Read More »
Blogger Widgets